Skip to main content
Professional window cleaning with a telescopic brush

Nova Clean Liverpool

Window cleaning

Interior and exterior glazing, with frames and sills included by agreement.

Window cleaning in Liverpool for houses, flats, shopfronts and commercial glazing

Technician wiping a glass partition

At certain times of day, a window can look clear from outside and show streaks, fingertips or mineral marks as soon as the sun reaches the inside face. The effect is especially noticeable in a west-facing living room or on a broad shopfront. Window cleaning is best scoped by the sides of glass you actually need treated, the height and setback of the panes and the condition of the frames. Nova Clean Liverpool assesses glazing for domestic and commercial customers and agrees how it can be reached, what is included and when the space needs to be available.

Tell us whether the enquiry is about regular exterior dirt, a full inside-and-out clean, access to glass above a conservatory or a one-off visit before a handover. If the panes have adhesive or paint on them following installation, say so before booking. The types of glass and frame, and what the material has been exposed to, are important to our choice of method. A close photograph and a wider image of the full elevation are useful for that discussion.

Work out which faces and surrounding details should be included

For a typical home, a quotation can distinguish the front, back and side elevations, ground floor extensions and the panes above them. Let us know which windows open into the room and which are fixed. External sills, frame edges, accessible channels and glazing beads can be discussed alongside the panes. Cleaning the inner face and the interior sill is useful if the main marks can be seen from the room, but that requires time inside. List French doors, patio doors, roof windows, borrowed-light panes and small side panels separately if you expect them to be included.

A shop or office may have a different set of glazing surfaces. A retail frontage can include a glass door with a kick plate, an illuminated display, a side panel and several sections of internal partition. A managed office can have privacy film, a glass meeting room and a large entrance through which people pass throughout the day. Identify what belongs to your unit and what sits within a landlord’s scope. Our retail deep cleaning page and office cleaning page describe the related premises work if you need more than glazing.

Describe height, reach and the conditions around the building before choosing access

Working access depends on more than floor number. A glazed area may sit behind a deep planting bed, above a low roof or set back inside a balcony. The team might need to work on a public pavement, around parked cars or through a very narrow side passage. Point out overhead restrictions, steps, locked gates and any surfaces that cannot be crossed. For taller or unusually shaped buildings, send photographs from ground level showing how the elevation sits in relation to the surrounding space. We can then assess which panes can be included and whether some areas require separate arrangements.

Ground-based systems, such as a telescopic water-fed pole, can be suitable for some exterior work where there is a clear working position. Some opening designs also make a face accessible from inside. Other panes call for a different method or a specialist access assessment. We agree these matters for the property in question and discuss how people using the surrounding area can be accommodated. Building owners and managers should provide their access rules and any relevant contractor arrangements before the visit. A length of pole alone does not tell you whether a particular window can be cleaned.

Water-fed pole cleaning and traditional detailing each suit different parts of a job

A ground-based water-fed system passes water to a brush at the pane so suitable exterior surfaces can be agitated and rinsed. It is commonly considered where the exterior glass and frames are regularly exposed to dust or rain residue and there is a workable route along the elevation. First cleans can need extra time where material has built up around frame edges. We assess where rinse water can go and how it may affect ground-level surfaces, an occupied threshold or another part of the building. Tell us if there are planters, electrical installations or newly applied finishes immediately below the windows.

On a reachable interior pane, traditional tools can allow finer control around edges, furniture and window coverings. Give the team room to work along the sill and set clear expectations around blinds, shutters and curtains. A leaded detail, decorative surface or old window can have restrictions that do not apply to a standard pane. Mention any sensitive coating, scratched glass, loose putty or brittle seals. Where the care requirements are unknown, a cautious inspection and a suitable test are more useful than selecting a method purely on the basis of the window’s size.

Know when a mark needs a separate assessment

Routine window cleaning addresses accessible soiling. Marks left by hard water, long-term run-off, a recent renovation or repeated cleaning with the wrong product can need separate decisions. Adhesive and sealant next to a new frame can bond strongly to a surface. An apparently dusty pane may have small paint spots or debris that could scratch the glass if handled incorrectly. Describe what created the mark if you know. If you have care information from the glazing installer, send it with the photographs. Do not try to scrape a delicate or treated surface just to see whether the residue is removable.

Condensation inside a sealed unit, damage to a coating and visible scratches may remain after cleaning. If a mark appears to lie between the layers of glass, show it from more than one angle and ask your glazing professional to assess the unit when needed. Where the windows are part of a property newly completed by builders, our after builders cleaning service may be relevant for the surrounding areas. List the affected panes and any restrictions on testing or product use so the glass can be scoped alongside the finished surfaces.

Review the window frames, channels and sills as separate surfaces

On a newer window, a broad uPVC frame may have several small recesses where ordinary soil collects. Painted timber can show a different pattern below the meeting rail and at the edges. A sill can be metal, masonry, stone or a coated material with its own care guidance. External frames and sill faces are generally easier to quote when photographs show the finish and condition as well as the glass. For interior tracks, identify which sections can actually be opened and made available. Include any sign of paint loss, cracked trim or water entering through damaged joints.

On a sliding door or a folding system, the bottom track may carry fine dirt and particles from outside. A general glass visit may not cover a detailed clean inside all channels or behind fixed panels, so ask specifically. On a balcony, glass balustrades and sliding doors can be considered with the floor and threshold, but expect each surface to have its own brief. See our balcony and terrace cleaning page if you need a separate assessment of the paving or decking alongside the glass.

Three examples of access planning for Liverpool windows

Bay windows and upper storeys on a terraced street

A property in Anfield, Tuebrook or Wavertree might have a shallow front garden for the bay and an entirely different route to the rear. Give details of gates and shared passages and explain whether the issue is all panes or those facing a particular street. Include any ground-floor extension or narrow yard that blocks a direct line to upstairs glazing. Where the front door opens onto the pavement, describe the normal foot traffic. Reviewing both elevations before the visit helps avoid promising the same set of surfaces where the access is very different.

Large balcony doors in a waterfront flat

In an apartment around the waterfront or city centre, the outer face may be accessible only through the flat or under building management arrangements. Ask whether the balcony door can be opened, how the outside face of each fixed panel can be approached and whether the building has a contractor access process. Reserve a lift if one is required and give the floor number and exact point of entry. When interior work is involved, move furniture and items from the sills only where it can be done safely and tell us if there are items that need to stay in place.

Shopfronts on streets with busy mornings or late trading

A storefront in Bold Street, Liverpool ONE or a neighbourhood shopping parade can look different depending on when deliveries and customers arrive. Share the opening schedule and advise whether you can release a narrow area near the display before trading. Note any stickers, phone boxes, pavement furniture or promotions beside the glass. A separate slot may work better for an inside pane that needs access from behind the display. Ask the store manager to confirm the date the display changes and who can approve any adjustments during the visit.

How size, condition and access determine the quotation

The number of windows is a useful starting point, but a large single pane and a set of small divided lights can take different amounts of time. Price also depends on sides included, accessibility, shape, work required on frames and sills and the condition of the glass. Higher or recessed glazing may add work even if the panes themselves are small. If all you need is the accessible frontage, say so. If the request includes a glazed roof, fixed panels, extra channels or post-installation residues, ask for those to be listed so the proposed scope is clear and comparable.

Explain if you want a single visit, a possible repeat schedule or a clean before another contractor takes over. With an apartment block or commercial premises, give any conditions attached to contractor entry and describe how adjoining occupiers will be informed. On a home, send a rough count organised by elevation and indicate any panes that are out of regular reach. We can review your postcode, the condition and the access needed, whether the property is in Liverpool, Garston, Woolton, Crosby, Bootle or elsewhere in Merseyside.

What to prepare before a window cleaning visit

Can I ask for the glass, frames and sills together?

Yes, if these surfaces are in a condition that can be treated and can be reached within the agreed method. Include them when requesting an estimate. State whether you mean external or internal parts, and show any channels you want considered. Frame restoration or redecoration should be discussed on its own if the material has degraded.

What happens in poor weather?

Weather can affect particular access arrangements, the ability to work around people and the final inspection of some panes. We assess the conditions against the scope for your property and discuss any change to the appointment if they affect the work. Give us a named contact so an amended slot can be coordinated with the building or the people who need to be present.

Will very close marks show up during the inspection?

Tell us where you normally stand when you notice marks and at what time they are easiest to see. At a shopfront, a pane may look clear under general lighting while a smear near the edge appears under a display spotlight. Photographs of the same surface from inside and outside can help establish which face is affected. If a suspected scratch can be seen from more than one angle, flag it before treatment so it can be considered separately.

How should I prepare for the inside glass?

Give clear access to the relevant parts of the room, lift small items from the sills and tell us how any curtains or blinds may be moved. Point out sensitive equipment, a fragile piece of furniture or a floor finish that needs particular treatment. Secure pets away from any doors being used to bring equipment inside.

Get a window cleaning quote for your Liverpool property

Send the postcode, number of panes, faces required, frame materials and photographs showing height and access. Tell us whether this is a one-off clean, part of a property handover or an enquiry for your premises manager.

We have 202 guests and no members online